pe (ape) ordering information the slim power relay pe relays (ape) vde compliance with rohs directive features 1. 5 mm .197 inch width allows high density mounting. space saved with 5 mm .197 inch slim type with 28 mm 1.102 inch length. allows high density mounting and enables making of compact devices. 2. satis?s insulation distance standard (vde0700: household devices). maintains clearance and creepage distance of 8 mm. complies with en60335 and vde0700. 3. high capacity of 6a. supports 6a 250 v ac nominal switching capacity (resistive load) and high capacity loads. 4. 1 form a and 1 form c contact arrangements available. 1 form a and 1 form c contact arrangements and a rich variation let you select the number of poles needed for your application. (please inquire regarding 1 form b.) 5. 4,000 v high breakdown voltage and 6,000 v high surge breakdown voltage. controller malfunction due to surges and noise is prevented thanks to breakdown v oltage of 4,000 vrms for 1 min. between contacts and coil, and 6,000 v surge breakdown voltage between contacts and coil. 6. sealed construction allows automatic washing. 7. complies with all safety standards. complies with electrical appliance and material safety law. ul, c-ul, vde, semko and sev certi?d. typical applications 1. interface relays for programmable controllers 2. output relays for measuring equipment, timers, counters and temperature controllers 3. industrial equipment, of?e equipment 4. house-hold appliances for europe coil voltage (dc) 4h: 4.5 v 06: 6 v 12: 12 v 18: 18 v 24: 24 v 48: 48 v contact arrangement 1: 1 form a 3: 1 form c contact type 0: single contact ape 0 contact material 0: standard contact 1: standard contact/au-plated note: ul/c-ul/vde/semko approved type is standard. all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
pe (ape) types standard packing: carton: 20 pcs.; case: 1,000 pcs. rating 1. coil data contact arrangement nominal coil voltage part no. 1 form a (without au-plated) 4.5v dc ape1004h 6v dc ape10006 12v dc ape10012 18v dc ape10018 24v dc ape10024 48v dc ape10048 1 form a (with au-plated) 4.5v dc ape1014h 6v dc ape10106 12v dc ape10112 18v dc ape10118 24v dc ape10124 48v dc ape10148 1 form c (without au-plated) 4.5v dc ape3004h 6v dc ape30006 12v dc ape30012 18v dc ape30018 24v dc ape30024 48v dc ape30048 1 form c (with au-plated) 4.5v dc ape3014h 6v dc ape30106 12v dc ape30112 18v dc APE30118 24v dc ape30124 48v dc ape30148 nominal coil voltage pick-up voltage (at 20 c 68 f ) drop-out voltage (at 20 c 68 f ) nominal operating current [ 10%] (at 20 c 68 f ) coil resistance [ 10%] (at 20 c 68 f ) nominal operating power max. allowable voltage (at 20 c 68 f ) 4.5v dc 66%v or less of nominal voltage (initial) 5%v or more of nominal voltage (initial) 38ma 119 ? 170mw 120%v of nominal voltage 6v dc 28ma 212 ? 12v dc 14ma 847 ? 18v dc 9ma 1,906 ? 24v dc 7ma 3,388 ? 48v dc 5ma 10,618 ? 217mw all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
pe (ape) 2. speci?ations notes: *1 this value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *2 wave is standard shock voltage of 1.2 50 s according to jec-212-1981 *3 re f er to 6. conditions f or ope r ation, t r anspo r t and sto r age mentioned in ambient envi r onment. reference data characteristics item speci?ations contact arrangement 1 form a, 1 form c initial contact resistance, max. max. 100 m ? (by voltage drop 6 v dc 1a) max. 30 m ? (by voltage drop 6 v dc 1a) contact material agsno 2 type au-plated agsno 2 type rating nominal switching capacity (resistive load) 6 a 250 v ac max. switching power (resistive load) 1,500 va max. switching voltage 250v ac max. switching current 6 a (ac) nominal operating power 170 mw (5 to 24 v dc), 217 mw (48 v dc) min. switching capacity (reference value)* 1 100 ma 5 v dc (without au-plated), 1 ma 1 v dc (with au-plated) electrical characteristics insulation resistance (initial) min. 1,000m ? (at 500v dc) measurement at same location as ?nitial breakdown voltage section. breakdown voltage (initial) between open contacts 1,000 vrms for 1 min. (detection current: 10 ma) between contact and coil 4,000 vrms for 1 min. (detection current: 10 ma) surge breakdown voltage* 2 between contact and coil 6,000 v (initial) temperature rise (at 20 c 68 f ) max. 30 c (by resistive method, nominal voltage applied to the coil; contact carrying current: 6a.) operate time (at 20 c 68 f ) max. 8 ms (approx. 5 ms) (nominal voltage applied to the coil, excluding contact bounce time.) release time (at 20 c 68 f ) max. 4 ms (approx. 2.5 ms) (nominal voltage applied to the coil, excluding contact bounce time.) (without diode) mechanical characteristics shock resistance functional 1 form c: min. 49 m/s 2 ; 1 form a: min. 98 m/s 2 (half-wave pulse of sine wave: 11 ms; detection time: 10 s.) destructive min. 980 m/s 2 (half-wave pulse of sine wave: 6 ms.) vibration resistance functional 10 to 55 hz at double amplitude of 1 mm (detection time: 10 s.) destructive 10 to 55 hz at double amplitude of 1.5 mm expected life mechanical min. 5 10 6 (at 180 cpm) electrical n.o.: min. 5 10 4 , n.c.: min. 3 10 4 (at 6 cpm) (at rated load) conditions conditions for operation, transport and storage* 3 ambient temperature: ?0 c to +85 c ?0 f to +185 f ; humidity: 5 to 85% r.h. (not freezing and condensing at low temperature) max. operating speed (at rated load) 6 cpm unit weight approx. 4 g .14 oz 1. max. switching capacity 2. coil temperature rise tested sample: ape30012 measured portion: inside the coil ambient temperature: 28 c 82 f 3. ambient temperature characteristics tested sample: ape30012, 6 pcs. 1 0.5 0.2 0.3 0.4 2 3 4 5 6 10 10 20 30 50 100 300 contact voltage, v contact current, a ac resistive load 50 60 70 80 90 40 30 20 10 0 100 110 120 130 coil applied voltage, %v temperature rise, c 6a 0a -20 -40 10 20 30 40 -30 -40 -20 85 60 40 0 20 -10 ambient temperature, c pick-up voltage rate of change, % drop-out voltage all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
pe (ape) dimensions (unit: mm inch ) notes for cautions f or us e , see rel a y t e c hnical in f ormation. 1. 1 form a type external dimensions general tolerance: 0.3 .012 0.4 +0.2 ?.1 +.008 ?004 1.2 2-0.5 3.78 21.42 28.0max. 2-1.0 5.04 1.9 3.5 0.5 15.0max. 5.0max. 1.2 0.4 +0.2 ?.1 +.008 ?004 .016 .843 .138 .020 .591max. .197max. .047 .016 .047 2-.020 .149 1.102max. 2-.039 .198 .075 pc board pattern (bottom view) tolerance: 0.1 .004 schematic (bottom view) 21.42 5.04 1.93.78 2-1.3 dia. 2-.051 dia. 2-1.0 dia. 2-.039 dia. 1.2 .843 .198 .075.149 .047 nocom coil 2. 1 form c type external dimensions general tolerance: 0.3 .012 1.2 2-0.5 3.78 21.42 28.0max. 3-1.0 5.04 1.9 3.5 0.5 15.0max. 5.0max. 1.2 5.04 0.4 +0.2 ?.1 +.008 ?004 0.4 +0.2 ?.1 +.008 ?004 .047 2-.020 .149 1.102max. 3-.039 .198 .075 .591max. .047 .198 .843 .138 .020 .197max. .016 .016 pc board pattern (bottom view) tolerance: 0.1 .004 schematic (bottom view) 21.42 5.04 1.9 3.78 3-1.3 dia. 3-.051 dia. 2-1.0 dia. 2-.039 dia. 1.2 5.04 .843 .198 .075 .149 .198 .047 no com coil nc 1. cleaning for automatic cleaning, the boiling method is recommended. avoid ultrasonic cleaning which subjects the relays to high frequency vibrations, which may cause the contacts to stick. it is recommended that a ?orinated hydrocarbon or other alcoholic solvents be used. 2. soldering the automatic soldering shall be performed under following condition. 1) preheating temperature: max. 120 c 248 f time: max. 120s 2) soldering temperature: 260 c 5 c 500 f 41 f time: max. 6s 3. coil operating power pure dc current should be applied to the coil. the wave form should be rectangular. if it includes ripple, the ripple factor should be less than 5%. however, check it with the actual circuit since the characteristics may be slightly different. 4. relay mounting if, after mounting on pc boards, the relays are to be subjected to vibration during operation, use other means besides soldering to secure the relays to the pc board. all rights rese r v ed ? c opyright panasonic elect r ic w o r k s co., ltd.
|
